Driver sd needs updating please use bustype methods ps3 totaly online dating personals

Posted by / 19-Jul-2017 01:21

TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1[ 0.461337] CPU0: Genuine Intel® CPU T2060 @ 1.60GHz stepping 0c[ 0.464001] Booting processor 1 APIC 0x1 ip 0x6000[ 0.004000] Initializing CPU#1[ 0.004000] Calibrating delay using timer specific routine.. ) 30 , :[ 3.820072] usb 2-2: new full speed USB device using ohci_hcd and address 2[ 4.027190] usb 2-2: configuration #1 chosen from 1 choice[ 33.816117] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen[ 33.816173] ata1.00: cmd ca/:95:6f/:/e4 tag out[ 33.816175] res 40/:/:/00 Emask 0x4 (timeout)[ 33.816266] ata1.00: status: dmesg, :[ 0.000000] BIOS EBDA/lowmem at: 0009fc00/0009fc00[ 0.000000] Initializing cgroup subsys cpuset[ 0.000000] Initializing cgroup subsys cpu[ 0.000000] Linux version 2.6.28-11-generic ([email protected]) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #42-Ubuntu SMP Fri Apr 17 UTC 2009 (Ubuntu 2.6.28-11.42-generic)[ 0.000000] KERNEL supported cpus:[ 0.000000] Intel Genuine Intel[ 0.000000] AMD Authentic AMD[ 0.000000] NSC Geode by NSC[ 0.000000] Cyrix Cyrix Instead[ 0.000000] Centaur Centaur Hauls[ 0.000000] Transmeta Genuine TMx86[ 0.000000] Transmeta Transmeta CPU[ 0.000000] UMC UMC UMC UMC[ 0.000000] BIOS-provided physical RAM map:[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)[ 0.000000] BIOS-e820: 0000000000100000 - 0000000017fd0000 (usable)[ 0.000000] BIOS-e820: 0000000017fd0000 - 0000000017fde000 (ACPI data)[ 0.000000] BIOS-e820: 0000000017fde000 - 0000000018000000 (ACPI NVS)[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)[ 0.000000] BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)[ 0.000000] DMI 2.3 present.[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working it around.[ 0.000000] last_pfn = 0x17fd0 max_arch_pfn = 0x100000[ 0.000000] Scanning 0 areas for low memory corruption[ 0.000000] modified physical RAM map:[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)[ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable)[ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved)[ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved)[ 0.000000] modified: 0000000000100000 - 0000000017fd0000 (usable)[ 0.000000] modified: 0000000017fd0000 - 0000000017fde000 (ACPI data)[ 0.000000] modified: 0000000017fde000 - 0000000018000000 (ACPI NVS)[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)[ 0.000000] modified: 00000000ff780000 - 0000000100000000 (reserved)[ 0.000000] kernel direct mapping tables up to 17fd0000 @ 10000-16000[ 0.000000] RAMDISK: 17884000 - 17fbf23a[ 0.000000] ACPI: RSDP 000F84E0, 0014 (r0 ACPIAM)[ 0.000000] ACPI: RSDT 17FD0000, 003C (r1 A. OK.[ 0.019511] ACPI: Core revision 20080926[ 0.023593] ACPI: Checking initramfs for custom DSDT[ 0.420553] .. OEMBOOT 2000707 MSFT 97)[ 0.000000] ACPI: SLIC 17FD0430, 0176 (r1 A. Total pages: 97375[ 0.000000] Kernel command line: root=UUID=1cffd031-9e3a-4d83-9967-4c1a8183959c ro quiet splash [ 0.000000] Enabling fast FPU save and restore... OEMSLIC 2000707 MSFT 97)[ 0.000000] ACPI: OEMB 17FDE040, 0056 (r1 A. Using 1 I/O APICs[ 0.000000] Using ACPI (MADT) for SMP configuration information[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000[ 0.000000] Allocating PCI resources starting at 20000000 (gap: 18000000:e6e00000)[ 0.000000] PERCPU: Allocating 45056 bytes of per cpu data[ 0.000000] NR_CPUS: 64, nr_cpu_ids: 2, nr_node_ids 1[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.The values can be read out using lm-sensors: See Kernel I'm currently running 3.5.0 with this patch applied. Here are some random notes on how LVM and the initrd-image can be set up./dev/sda1: 128MB boot /dev/sda2: LVM # Creating initrd image $ apt-get install lvm2 $ mkinitramfs -o /tmp/initrd $ file /tmp/initrd /tmp/initrd: gzip compressed data, from Unix, last modified: Sat Mar 30 2013 $ mkimage -A arm -O linux -T ramdisk -C none -a 0 -e 0 -n initramfs -d /tmp/initrd /boot/u Initrd Image Name: initramfs Created: Sat Mar 30 2013 Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 3946951 Bytes = 3854.44 k B = 3.76 MB Load Address: 0x00000000 Entry Point: 0x00000000 $ file /boot/u Initrd /boot/u Initrd: u-boot legacy u Image, initramfs, Linux/ARM, RAMDisk Image (Not compressed), 3946951 bytes, Sat Mar 30 2013, Load Address: 0x00000000, Entry Point: 0x00000000, Header CRC: 0x23D913F3, Data CRC: 0x03CF6AE5 $ mount /dev/sdb1 /tmp/boot/ $ ls /tmp/boot/ lost found u Image $ cp /boot/u Initrd /tmp/boot/ ### UBOOT Config # boot without saving usb start ext2load usb 0:1 0x01100000 /u Initrd ext2load usb 0:1 0x00800000 /u Image setenv bootargs 'console=tty S0,115200 root=/dev/mapper/vg_iconnect-lv_root rootdelay=20' bootm 0x00800000 0x01100000 # save the stuff permanently setenv bootargs_console 'console=tty S0,115200 root=/dev/mapper/vg_iconnect-lv_root rootdelay=20' setenv bootcmd_usb 'usb start; ext2load usb 0:1 0x00800000 /u Image; ext2load usb 0:1 0x01100000 /u Initrd' setenv bootcmd 'setenv bootargs $(bootargs_console); run bootcmd_usb;bootm 0x00800000 0x01100000' saveenv $ uname -a Linux storage 2.6.30.9 #1 PREEMPT Mon Jan 25 EST 2010 armv5tel GNU/Linux $ dmesg Linux version 2.6.30.9 ([email protected]) (gcc version 4.3.2 (crosstool-NG-1.3.1) ) #1 PREEMPT Mon Jan 25 EST 2010 CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=00053977 CPU: VIVT data cache, VIVT instruction cache Machine: Marvell RD-88F6281 Reference Board Memory policy: ECC disabled, Data cache writeback On node 0 totalpages: 65536 free_area_init_node: node 0, pgdat c03f354c, node_mem_map c04b0000 Normal zone: 512 pages used for memmap Normal zone: 0 pages reserved Normal zone: 65024 pages, LIFO batch:15 Built 1 zonelists in Zone order, mobility grouping on.

OEMFACP 2000707 MSFT 97)[ 0.000000] ACPI: DSDT 17FD05E0, 6FFB (r1 0AAAA 0AAAAB58 B58 INTL 2002026)[ 0.000000] ACPI: FACS 17FDE000, 0040[ 0.000000] ACPI: APIC 17FD0390, 005C (r1 A. Ok.[ 0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, Min Objects=0, CPUs=2, Nodes=1[ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency..

I've also run into this recently and failed to come up with any elegant solution.

Of course the warning could be safely ignored, but it doesn't seem right in the long run.

rootfs image is not initramfs (no cpio magic); looks like an initrd Freeing initrd memory: 1732K msgmni has been set to 498 alg: No test for stdrng (krng) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled serial8250.0: tty S0 at MMIO 0xf1012000 (irq = 33) is a 16550A console [tty S0] enabled brd: module loaded loop: module loaded Driver 'sd' needs updating - please use bus_type methods MV-643xx 10/100/1000 ethernet driver version 1.4 mv643xx_eth smi: probed net eth0: port 0 with MAC address 00:d0:b8:0d:0e:c7 NAND device: Manufacturer ID: 0xad, Chip ID: 0xdc (Hynix NAND 512Mi B 3,3V 8-bit) Scanning device for bad blocks Bad eraseblock 2788 at 0x000015c80000 Bad eraseblock 3859 at 0x00001e260000 5 cmdlinepart partitions found on MTD device orion_nand Creating 5 MTD partitions on "orion_nand": 0x000000000000-0x0000000c0000 : "uboot" 0x0000000a0000-0x0000000c0000 : "env" 0x000000100000-0x000000400000 : "z Image" 0x000000540000-0x000000840000 : "initrd" 0x000000980000-0x00001fd80000 : "boot" ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver orion-ehci orion-ehci.0: Marvell Orion EHCI orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1 orion-ehci orion-ehci.0: irq 19, io mem 0xf1050000 orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver uhci_hcd: USB Universal Host Controller Interface driver Initializing USB Mass Storage driver...

usbcore: registered new interface driver usb-storage USB Mass Storage support registered.

driver sd needs updating please use bustype methods ps3-80driver sd needs updating please use bustype methods ps3-51driver sd needs updating please use bustype methods ps3-89

If you've just bought a band new drive, plugged it into the PS3 and it's not being detected, the most likely problem is that it is not "formatted" correctly.

One thought on “driver sd needs updating please use bustype methods ps3”

  1. I then landed up in KIIT Bhubaneswar and after 4 years of what every typical engineering life looks like, I joined Accenture in Bangalore. Before all the running around for career, jobs – I met Suchismita Bhagat. The Bhaina Syndrome The procedure of calling anyone ‘bhaina’ at the drop of a hat to diffuse a particularly tense situation. And the Pipli hangings have been a craze with all my work colleagues and friends.6. This however, you will pick up from the minute you get down at the airport and the driver is cut off by a bicycle rider.9.